Eagle Klaw 2.0 Floor Mat Clips (8 Sets) - Black Car Accessories

Introducing Eagle Klaw: The World's Pioneering Multi-Point Tension Retainer

The Eagle Klaw is the world's only multi-point tension retainer that grips your car floor with the strength of an eagle's claw. No need to drill or cut the floor - it takes just 3 minutes to secure your car mat. Simply step on it to install.

Here's how it works: The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. If your mat doesn't have holes, use the optional 3/8" Cutter. The five-legged design provides optimal force distribution, ensuring all spikes are inserted at the same time.

The fastener won't budge even if you push the mat hard in any direction. When you step on the cap, the anchor bends inward and the spikes go through the floor at a slight outward angle. Upon release, the fastener springs back, and the spikes return to a vertical position, firmly gripping the carpet.

Due to the spike design, there will be no visible holes in the carpet if you have to remove the anchor, making it minimally intrusive.

Installation is a Breeze, and the Anchors Won't Break if You...

1. Read the instructions carefully before beginning.
2. Ensure the car floor has sufficient padding or space under the carpet at the installation site.
3. Put the cap through the hole, push the sliding washer up onto the cap post.
4. Screw the cap into the anchor until the end of the cap post is even or flush with the bottom of the anchor.
5. Place the car mat where you want it to stay.
6. Pre-engage the spikes by pushing the fastener down or tapping on the cap with a hammer slightly to prevent rebound.
7. Stomp down on the Cap or use a hammer to ensure vertical movement so the Spikes can pierce the floor.

Avoid these Common installation mistakes that cause Negative Reviews:

Don't tighten the cap into the anchor before stomping on the cap to install the fastener. The spikes will break if the cap post sticks out under the anchor.

Do screw the cap into the anchor until the end of the cap post is even or flush with the bottom of the anchor. This will ensure all prongs are fully inserted without obstruction.

Don't just engage the spikes with the carpet. They may come loose or break, and the mat will move again.

Do make sure that all prongs fully penetrate the floor.

RE-DESIGNED and IMPROVED, Eagle Klaw 2.0 is Tough as a Nail! This PATENTED, multi-point tension-mounted, minimally intrusive design grips your car floor with the strength of an eagle's claw.

The MOST SECURE and EASIEST way to keep car floor mats in place. Kits include 2 fasteners per mat and an optional hole cutter.

FASTEN YOUR CAR MAT IN 3 MINUTES. Use a cutter if the floor mat doesn't have holes or grommets. All you have to do to install Eagle Klaw is Step on It!

EAGLE KLAW works in all cars that have flooring with sufficient padding or space under it. FOLLOW INSTALLATION INSTRUCTIONS, drive safely, and keep your car floor nice and clean. Made in the USA.

product information: